Autori:
1. Milena Ćosić, Tehnikum Taurunum, College of Mechanical Engineering, Serbia
2. Mirjana Stojanovic, Serbia

Apstrakt:
In this work, the results of research concerning application of rheocasting process for piston alloys structure and properties improvement have been shown. The procedure of stirring the melt by a plate stirrer at different speeds (rpm): 500, 1000 and 1500 was used. The influence of mechanical stirring effect on morphology and distribution of primary phases (- Al i Si) was tested in the hypereutectic Al-18wt%Si alloy. Test results showed a positive influence of melt stirring speed on the structural change of the tested alloy in comparison with the structure of samples obtained by a conventional casting procedure. The effects of a structural change are optimised at the melt stirring speed of 500 rpm.

Tematska oblast:
Proizvodne tehnologije i inženjerstvo

Uvodni rad:
Da

*** no_trans(Date_Paper_Create, sh )***:
05.04.2011.

Br. otvaranja:
712

Konferencija:
11^th International Conference on Accomplishments in Mechanical and Industrial Engineering

Prijavljeni rad od autora